Safety and directions.

Directions

1. 1Clean the outside of the cup with isopropyl alcohol and let it dry.
2. 2Shake the bottle well.
3. 3In a well-ventilated area, spray from 6 to 10 inches away in light, even coats.
4. 4Let it dry for 5 minutes.
5. 5Apply a second thin coat for best results.

Handling

• Apply to outside surfaces only. Do not apply to the inside of a cup or to any surface that touches food or drink. Not for ingestion.
• Use only outdoors or in a well-ventilated area.
• Avoid breathing the spray mist.
• Wear eye protection. Nitrile gloves are recommended for frequent use.
• Wash hands after handling.
• Spilled product can make floors slippery. Absorb it with an inert material.

Storage

Keep tightly closed at 41–86°F (5–30°C). Keep from freezing and out of direct sunlight. Shelf life is about 24 months.

First aid

If inhaled

Move to fresh air. If symptoms persist, seek medical attention.

On skin

Wash with soap and water.

In eyes

Rinse with water for several minutes. Remove contact lenses if present and easy to do, and keep rinsing. If irritation persists, get medical advice.

If swallowed

Rinse mouth. Do not induce vomiting. Seek medical advice if a large amount was swallowed.

What it’s made of

Approximate ranges by weight, from the Safety Data Sheet.

Water

80–92%

Acrylic polymer dispersion (water-borne)

3–10%

Hydrophobic fumed silica (treated)

1–5%

Isopropyl alcohol (co-solvent)

0.5–2%

Additives (wetting and flow agents, preservatives)

Under 1%

Not classified as hazardous under GHS when used as intended. It may cause mild eye irritation, and respiratory irritation if the spray mist is inhaled.

Questions

Product information and emergencies: 207-745-7575. PO Box 52, Detroit, ME 04929.